Skip to main content
GAMEPAD
TESTER
Test, diagnose and calibrate your PlayStation controller directly from your browser. No downloads, no installation and no unnecessary nonsense!
START TESTING
HOW IT WORKS!
Supports DualShock 4, DualSense, DualSense Edge and PS VR2 controllers.
Desktop computer USB connection Chrome or Edge HTTPS
LIVE CONTROLLER DIAGNOSTICS
TEST & CALIBRATE YOUR CONTROLLER
Connect a supported controller using a USB cable, press
Connect and use the live diagnostic interface below.

Controller communication happens locally between your browser and the connected device. No controller data is uploaded.

READ BEFORE CALIBRATING
CALIBRATION DOES NOT REPAIR WORN HARDWARE
Stick drift is normally caused by worn potentiometers, contaminated components or mechanical damage inside the joystick. Calibration is intended to configure replacement parts after the physical repair has been completed.

• Keep the controller battery connected and sufficiently charged.
• Use a reliable USB cable and do not disconnect the controller while changes are being saved.
• Test temporary calibration before saving anything permanently.
• Only official supported controllers can be calibrated.
• PS VR2 support is currently limited and experimental.

If the joystick hardware is worn out, software cannot magically repair it. Solder still beats wishful thinking.

GAMEPAD TESTER
WHAT CAN IT CHECK?
Run a complete controller check before and after repair, or
verify a used controller before buying it.
BUTTONS & TRIGGERS
Check directional buttons, face buttons, shoulder buttons, analogue triggers and stick clicks in real time.
ANALOGUE STICKS
Monitor centre position, movement range, responsiveness and circularity for both analogue sticks.
USB CONNECTION
Check whether movement of the USB cable causes communication or power interruptions.
MOTION SENSORS
Test gyroscope and accelerometer response, accuracy and movement tracking on supported controllers.
VIEW HARDWARE
View battery level, firmware information, controller model and available hardware details.
EXTRA FUNCTIONS
Test the trackpad, vibration, lights, speaker, microphone and headphone output when supported.
THREE SIMPLE STEPS
CONNECT. TEST. DIAGNOSE.
SUPPORTED BROWSERS
Open the page on a desktop computer using Google Chrome or Microsoft Edge.
CONNECT CONTROLLER BY USB
Connect a supported controller directly to the computer using a USB data cable.
RUN THE CONTROLLER TEST
Press Connect, open Quick Test and follow the on-screen instructions.
READY WHEN YOU ARE

READY TO TEST YOUR
CONTROLLER?

Connect your controller by USB and find out exactly what works,
what does not and what needs attention.
OPEN CONTROLLER TESTER
Free to use  ·  No installation  ·  Local browser communication
BeoGeek Gamepad Tester is an independent browser-based diagnostic tool and is not affiliated with Sony Interactive Entertainment or PlayStation. Controller functionality is based on the open-source DualShock Calibration GUI project and is provided without warranty.
View the original open-source project →